How to Turn off Subaru Daytime Running Lights

To turn off Subaru Daytime Running Lights (DRL), consult the vehicle’s manual or disable them through the car’s infotainment system. Some models may require a professional to modify the system.

Turning off the Daytime Running Lights on a Subaru is a task that might be necessary for a variety of reasons, such as servicing or personal preference. Subaru vehicles are known for their comprehensive safety features, where Daytime Running Lights play a key role.

Nevertheless, owners have the discretion to disable them, depending on the model and year of the vehicle. The process usually involves a few simple steps. Still, it is vital to ensure that your actions comply with local laws, as DRLs are mandatory in many regions for increased visibility on the road. Always take into account that while managing this feature, safety should never be compromised.

How to Turn off Subaru Daytime Running Lights


Understanding Subaru Daytime Running Lights

Daytime Running Lights (DRLs) are designed to increase the visibility of your vehicle during daylight hours, reducing the risk of accidents. Often, the lights are a standard safety feature encountered in modern Subaru vehicles. Despite their safety benefits, situations arise where turning off the DRLs may be needed or preferred—for instance, during vehicle maintenance or when using the vehicle in a setting where continuous light is unnecessary or a distraction.

Understanding the proper technique to disable these lights can be crucial for Subaru owners. It might be required to access certain settings or switches in the car, and the process can vary depending on the Subaru model. Such adjustments should be performed mindfully, respecting road safety regulations, as the DRLs are first and foremost meant to protect drivers and pedestrians.

How To Turn Off Subaru Daytime Running Lights

Understanding the specific model of your Subaru is crucial as different models may have unique requirements for disabling the Daytime Running Lights (DRL). For most modern Subarus, the process remains relatively similar, but always refer to your vehicle’s owner’s manual for model-specific instructions.

To locate the Daytime Running Lights switch, first inspect the vehicle’s manual. Typically, the switch can be found on the dash, steering column, or within the vehicle’s infotainment system. Look for a DRL icon or wording that explicitly states ‘DRL’ to ensure the correct switch is identified.

Disabling the Daytime Running Lights may involve multiple steps. You might need to:

  • Turn the car’s ignition to the “On” position without starting the engine.
  • Press and hold the DRL switch, if there is a physical one, for a number of seconds until the lights shut off.
  • For a software-based control, navigate through the infotainment system under the lighting settings. Toggle the DRL option to the off position.

Note that some vehicles may require a sequence of actions or the use of diagnostic tools for this process. Always ensure the vehicle is stationary and that you are parked safely before attempting to disable the lights.

Turning Off Subaru Daytime Running Lights In Legacy

Deactivating Daytime Running Lights (DRLs) on your Subaru Legacy might be necessary for vehicle inspections, electrical work, or other specific situations. To accomplish this, the step-by-step process is quite straightforward. First, ensure the ignition is turned off before locating the DRL resistor.

Typically, the resistor is found in the engine compartment, often on the passenger side. Upon locating it, disconnect the resistor harness which will disable the DRLs. For Legacy models, you might find the resistor near the strut tower. After disconnecting, confirm that the DRL indicator light is off when the engine is on. Remember, driving without DRLs might not comply with road safety regulations; thus, perform this action only when appropriate and legally permitted.

Turning Off Subaru Daytime Running Lights In Outback

Disabling the daytime running lights on a Subaru Outback can be accomplished in a few steps. The process involves accessing the vehicle’s fuse box and removing the appropriate fuse. Before proceeding, it is crucial to ensure the vehicle is turned off and the keys are removed to prevent any electrical incidents.

Bear in mind that the daytime running lights are a safety feature, designed to increase visibility of your vehicle during the day. Therefore, if you choose to turn them off, always remember to manually turn on your headlights in conditions that require additional illumination.

Locating the fuse box in the Subaru Outback is the initial step; it is typically found under the steering column. Once located, refer to the vehicle’s manual for the specific fuse associated with the daytime running lights. Removing this fuse will disable them. It is advisable to keep the removed fuse in a safe place, should you decide to reenable the daytime running lights in the future.

Frequently Asked Questions For How To Turn Off Subaru Daytime Running Lights

Can Daytime Running Lights Be Turned Off?

Most vehicles with daytime running lights allow you to turn them off, often by using specific procedures detailed in the owner’s manual. Always ensure compliance with local laws regarding daytime running light usage.

What Is The Drl On A Subaru?

The DRL on a Subaru refers to the Daytime Running Lights, which are automatically illuminated when the car is running to improve visibility during the day.

What Controls Daytime Running Lights?

Daytime running lights are controlled by a vehicle’s daylight sensor or directly through the ignition switch. Once the engine starts, the lights automatically illuminate.

Do Drls Turn Off When Headlights Are On?

Daytime running lights (DRLs) often dim or switch off once headlights are activated, ensuring clear visibility during night driving. This varies by vehicle model and manufacturer.


Disabling your Subaru’s daytime running lights can be a simple process. By following the steps outlined, you’ll be able to adjust your vehicle to your preferences quickly. Remember, while modifying car settings, always prioritize safety and legality. For more automotive tips and how-tos, stay tuned to our blog.

Drive safe and stay informed!

James Frank

This is James Frank. I am a Home Expert and also Part-Time blogger. I am a home maintenance adviser and also a Part-time blogger to help people about there home maintenance, I am loving to write about home maintenance for new homeowners. and I am in this place for about 10 years. I would like to share my opinion, IDEA, Tips and much more information with My friends, family, and my Blog visitors.

Recent Posts

Share via
Copy link