What Size Belt for Samsung Dryer


A clothes dryer is a household appliance that many people use on a regular basis. While most dryers come in standard sizes, there are some that are made for specific types of clothing or for certain load sizes. It’s important to know what size belt you need for your Samsung dryer, as this can impact how well the appliance works and how long it lasts.

There are a few different ways to determine the right size belt for your dryer.

It can be difficult to know what size belt to purchase for your Samsung dryer. The best way to ensure you are buying the correct size is by measuring the old belt that needs to be replaced. If you cannot measure the old belt, you can reference the manual that came with your dryer or look up the model number online to find out the specific measurements needed.

Once you have determined the size of belt you need, simply purchase a replacement from your local home improvement store or online retailer.

How To: Samsung Dryer Drum Belt 6602-001655

How Do I Know What Size Belt I Need for My Dryer?

If your dryer has a belt, it’s important to know the size of the belt so you can replace it if necessary. Here are a few ways to determine the size of your dryer’s belt: 1. Check the manufacturer’s manual.

This is the most reliable way to find out what size belt your dryer needs. 2. Measure the old belt. If you need to replace your dryer’s belt, measure the old one and take it with you when you buy a new one so you can be sure to get the right size.

3. Look up the model number online. You can usually find this information on the manufacturer’s website or by doing a quick search online. Once you have the model number, you should be able to find out what size belt your dryer needs from there.

Do All Dryers Have the Same Belt?

No, all dryers do not have the same belt. In fact, there are several different types of belts that can be found on dryers, depending on the model and make of the dryer. The most common type of belt is the flat belt, which is a continuous loop of material that runs around two or more pulleys.

Flat belts are typically made from rubber or cloth and can stretch over time, which can cause them to slip off the pulleys. Another type of belt is the V-belt, which has a V-shaped cross section and runs between two grooved pulleys. V-belts are less likely to slip than flat belts and can handle higher loads.

Finally, there are timing belts, which are used in some dryers to synchronize the rotation of the drum with the rotation of the motor shaft. Timing belts are made from reinforced rubber and must be replaced periodically to prevent them from breaking.

How Much is a Drum Belt for a Samsung Dryer?

A drum belt for a Samsung dryer typically costs around $15-$25. However, prices can vary depending on the model of Samsung dryer and where you purchase the belt from. For example, some models of Samsung dryers may require a different size belt than others, so it’s important to check your owner’s manual or contact a Samsung customer service representative to be sure you’re getting the correct belt for your model.

Also, some retail stores may sell drum belts for Samsung dryers at a higher price than others, so it’s worth shopping around to find the best deal.

Is There a Belt on a Samsung Dryer?

If you’re wondering if there’s a belt on your Samsung dryer, the answer is most likely yes. Most clothes dryers have a belt that helps to rotate the drum. The drum is what holds your clothes while they’re being dried.

The belt rotates the drum so that the clothes can tumble around anddry evenly. The belt on your Samsung dryer may be located underneath the main top panel of thedryer. To access it, you’ll need to remove this panel.

Once you’ve removed thepanel, you should be able to see the belt wrapped around the drum. If you can’tsee it, feel around for it with your hand. If you need to replace the belt on your Samsung dryer, it’s a relatively simple process.

You’ll just need to purchase a new belt and followthe instructions in your owner’s manual for how to replace it.

What Size Belt for Samsung Dryer

Credit: www.amazon.com

Samsung Dryer Replacement Belt

A dryer’s belt can wear out over time, causing the dryer to become less efficient. If your Samsung dryer is no longer working as well as it used to, it may be time to replace the belt. This is a fairly easy repair that you can do yourself, and it will only take a few minutes.

First, unplug your dryer from the power outlet. Then, remove the front panel of the dryer so you can access the drum. Next, locate the old belt and remove it from the drum.

To do this, you will need to loosen the tension pulley. Once the old belt is removed, clean off any debris from the drum before installing the new belt. To install the new belt, simply wrap it around the drum and thread it through all of the pulleys.

Be sure to route it underneath the tension pulley so that it doesn’t come off when you start using your dryer again. Finally, reattach the front panel of your dryer and plug it back in to use!

Samsung Dryer Belt Replacement Part

If your Samsung dryer is noisy or not spinning, the belt may be to blame. A worn or broken belt can cause the dryer drum to make a thumping noise as it turns. Or, the belt may slip off the pulley entirely, causing the drum to stop turning.

Replacing a dryer belt is a fairly simple repair that anyone with basic handyman skills can do. But first, you need to find the right replacement part for your model of dryer. The best way to find the correct replacement Samsung dryer belt is by searching for your model number on Samsung’s website or on parts websites like Repair Clinic or PartSelect.

Once you’ve found the right part number, you can purchase the belt from an online retailer or your local appliance store. Once you have the new belt, follow these steps to replace it: 1) Unplug your dryer and move it away from the wall so you can access the back panel.

Remove any screws holding on the back panel and set it aside. 2) Locate the old belt around the drum and pulley wheel and gently pull it off. Discard ofthe old belt.

3) Feedthe newbeltaroundthedrumandpulleywheel (make sure it’s positioned correctly). Then feeditthroughtheslotsinthebackpanelandpullittaughtbefore screwingthebackpanelintoplaceagain..

4) Plug inyourdryerandtestitouttoensurethenewbelthasbeeninstalled correctlyandisworkingproperly..

Samsung Dryer Belts

If your Samsung dryer is not spinning, the most likely culprit is a broken belt. Thankfully, this is an easy fix that you can do yourself. In this blog post, we’ll show you how to replace a broken dryer belt on a Samsung dryer.

First, unplug your dryer from the power outlet and remove the front panel of the dryer. Next, locate the tension pulley and release the tension on the belt by turning the pulley counterclockwise. Once the tension is released, you can remove the old belt from the dryer drum.

To install the new belt, simply wrap it around the drum and thread it through all of the pulleys. Be sure to route it over all of the rollers and through any idler pulleys. Finally, re-tension the belt by turning the tension pulley clockwise until it’s snug againstthe belt.

Replacethe front panel of yourdryerand plugit back in to test it out!


If your Samsung dryer has a model number that starts with “DE” or “DG,” you’ll need a size 4 belt. If your model number starts with “DJ,” you’ll need a size 3 belt.

Recent Posts

Share via
Copy link
Powered by Social Snap