The cooktop on light is a bright light that comes on whenever the cooktop is turned on. This can be annoying, especially at night, when you’re trying to sleep.
- Unplug the cooktop from the power outlet
- Lift up the cooktop and find the “On” light located underneath it
- unscrew the light bulb from its socket and replace it with a new one
- screw the light bulb back into its socket and plug the cooktop back into the power outlet
Stove Burner Light Won't Turn Off Whirlpool (Cooktop On)
Why Does My Cooktop Light Stay On?
One of the most common questions we receive at Mr. Appliance® is, “Why does my cooktop light stay on?” The answer to this question is actually pretty simple. In order for your cooktop’s surface light to turn off, the switch must be in the “off” position and the unit must be cool to the touch.
If either of these two things is not true, then the light will remain on.
There are a few reasons why your switch may not be in the “off” position. First, make sure that you have pushed the switch all the way to the left.
Sometimes, switches can get stuck in between positions and will need to be jiggled a bit to get them into the correct spot. If you still can’t get your switch into the “off” position, it may be because there is something blocking it from moving all the way over. This could be a piece of food or grease that has built up around the switch over time.
Use a toothpick or other sharp object to clear away any debris that may be causing this issue.
Another reason why your cooktop’s surface light may stay on is because the unit itself is still hot. Surface units take some time to cool down after they’ve been used, so if you just turned off your cooktop it’s possible that it’s still too warm for the surface light switch to register as “off.”
Give it a few minutes and try again – chances are good that once your cooktop has cooled down completely, its surface light will go out as well!
What Do You Do When Your Stove Light Won’T Turn Off?
If your stove light won’t turn off, there are a few things you can try. First, check to see if the light bulb is loose. If it is, tighten it until it is snug.
Next, check the socket to see if there is any debris or dirt preventing proper contact between the bulb and socket. If so, clean out the socket and try again. Finally, if neither of these solutions work, you may need to replace the light switch.
How Do You Turn the Stove Light Off?
The stove light is an important safety feature that allows you to see the burner flame. If the stove light is on, it means that the gas is still flowing and the burner is still hot. To turn the stove light off, simply push in on the knob and rotate it to the “off” position.
Why Does My Element on Light Stay On?
When you turn on a light, an element inside the light bulb heats up and produces light. The element is usually made of metal, such as tungsten, and is attached to two wires called leads. When the element gets hot enough, it starts to glow.
The reason your element stays on is because there’s a steady flow of electricity passing through it. The element can heat up to around 4,000 degrees Celsius (7,232 degrees Fahrenheit) before it melts. So as long as there’s a constant supply of electricity, your element will stay lit.
One thing that can cause your element to stop working is if the lead wires start to break down. This can happen if the wires are old or if they’re not properly insulated. If this happens, then the flow of electricity will be interrupted and the element will cool down and stop glowing.
Credit: www.reddit.com
Cooktop Indicator Light Stays on
If your cooktop’s indicator light stays on, it could be a sign that the cooktop is not heating properly. This could be due to a variety of factors, such as a faulty heating element or incorrect temperature setting. If you notice that your indicator light stays on, check the following:
– Make sure the cooktop is plugged in and that the power switch is turned on.
– Check the heating element to see if it is burned out. If so, replace it with a new one.
– Adjust the temperature setting to see if that makes a difference.
– If none of these solutions work, contact a qualified technician for further assistance.
Whirlpool Range “Cooktop On” Light Stays on Forever
If your Whirlpool range’s “cooktop on” light stays on forever, there are a few possible causes. First, check to see if the surface burners are turned off. If they are, the cooktop on light is probably just malfunctioning and will need to be replaced.
If the surface burners are turned on, however, there may be a problem with the igniter switch. The igniter switch is what turns the gas on and off to the burner. If it’s stuck in the “on” position, that would explain why your cooktop on light is staying lit.
To fix a stuck igniter switch, you’ll need to replace it with a new one. You can find replacement switches at most hardware stores or online. Be sure to turn off the power to your range before making any repairs!
Hot Surface Light Stays on Stove Dangerous
If your hot surface light stays on after you turn off your stove, it could be a sign of a serious problem. This is because the light is designed to come on only when the stove’s heating element is turned on. If the light stays on after the element has been turned off, it means that there is still electricity running through the element.
This can be extremely dangerous, as it means that the element could turn back on at any time – possibly causing a fire.
If you notice that your hot surface light stays on after you’ve turned off your stove, you should call an electrician or appliance repair person right away. They will be able to diagnose the problem and make any necessary repairs.
In the meantime, do not use your stove until it has been fixed.
Conclusion
If your cooktop has an “on” light, it’s easy to turn it off. All you need to do is find the switch that controls the light and flip it to the “off” position. If you can’t find the switch, check your owner’s manual for instructions.