How to Deflate Air Mattress

Fact Checked By | Post Updated On:

To deflate an air mattress, you’ll need to start by locating the valve. This is usually in a corner of the mattress and can be opened or closed with a simple twist. Once you’ve found it, open the valve as wide as possible then fold up one end of the mattress.

Allow all the air to escape from this end while pushing down on it to help move any excess air out faster. Once most of the air has been expelled, close off the valve and repeat this process at each corner until all four corners are done. Finally, roll up your mattress tightly and store it away for future use!

  • Gather Supplies: In order to deflate an air mattress, you will need a vacuum cleaner and the necessary attachments, as well as a few large garbage bags
  • Place Garbage Bags on Mattress: Lay out one or two of the garbage bags onto the air mattress in order to catch any debris that may be inside
  • This will also help protect your mattress from dirt and dust while it is being deflated
  • Attach Vacuum Cleaner Hose: Take your vacuum cleaner hose attachment and attach it to the nozzle on your vacuum cleaner
  • Then, place this hose over one of the mattresses’ valve openings so that all of the air can be sucked away from within it without issue
  • 4
  • Turn On Vacuum Cleaner: Once everything is securely attached, turn on your vacuum cleaner and let it run for several minutes until all of the air has been removed from within your mattress completely with no more bubbles escaping through its valves or sides when pressed down upon them with either hands or feet
  • 5 Remove Bags & Store Mattress Properly : Once done, turn off your vacuum cleaner and remove both garbage bags before storing away in its designated storage area such as under-the-bed compartments or closets where they are not exposed to direct sunlight or any other sources of heat which could cause damage over time

How to deflate an air mattress

How Do You Manually Deflate an Air Mattress?

Manually deflating an air mattress requires a few simple steps. • Locate the valve and unscrew it to release the air pressure inside the mattress. • Press down on various spots of the mattress to expel as much air as possible.

• Optionally, use a vacuum cleaner with a hose attachment to suck out any remaining air in the mattress. • After all of the air is released, fold up or roll up your deflated mattress for easy storage. By following these easy steps, you can manually deflate an inflatable bed quickly and efficiently!

Why Wont My Air Mattress Deflate?

There are several reasons why an air mattress may not deflate. – Check for punctures or tears in the material that would prevent air from leaving. – Make sure all of the valves are closed so no air can escape.

– Check to ensure the pump is working correctly and that it is properly attached to the valve. – If you’re using an electric pump, make sure it’s plugged into a power source. If none of these steps solve your problem, try laying on top of the mattress while letting out some extra air through any open valves – this should help release trapped pockets of air inside and allow you to deflate your mattress completely.

How Do You Deflate a Self Inflating Air Mattress?

To deflate a self inflating air mattress, follow these steps: – Unplug the valve and roll the mattress up tightly. – Push out as much of the remaining air inside before folding it.

– Put some weight on top of the folded mattress to help squeeze out any trapped air. – Repeat this process until you have squeezed all of the trapped air out. Finally, store your deflated self inflating air mattress in a safe place away from moisture or direct sunlight.

This will ensure that it remains in good condition for future use!

Do Air Mattresses Naturally Deflate?

Air mattresses do naturally deflate over time. This is because of the air pressure inside the mattress and its decrease in elasticity due to use. Here are some reasons why an air mattress may deflate:

• The material used for construction of the mattress has decreased elasticity, resulting in deflation. • Leaks or punctures cause a decrease in internal air pressure, leading to deflation. • Over-inflation can also lead to quicker deflation as too much air will escape more quickly than usual.

It’s important to regularly check your air mattress for any signs of damage or deterioration that could lead to deflation so you can take corrective action accordingly.

How to Deflate Air Mattress


How to Deflate Bestway Air Bed With Built-In Pump

Deflating your Bestway air bed with built-in pump is a simple process that requires minimal setup. First, locate the deflation valve on the bottom side of the mattress. Next, press and hold down this deflation valve for several seconds until you hear a hissing sound indicating that air is escaping from the mattress.

Finally, remove all remaining air by pressing and releasing the deflation valve repeatedly until it no longer emits any more air. When finished deflating your Bestway Air Bed with Built-In Pump, you can easily fold up or store away for later use.

Air Bed Won’T Deflate

An air bed will not deflate if the air valve is blocked, the mattress is punctured, or it has been exposed to extreme temperatures. If your air bed won’t deflate, check for any of these problems first and make sure that the valve is open so that air can escape. Additionally, you may need to replace the pump if it doesn’t seem to be working properly.

Intex Air Mattress Won’T Deflate

If your Intex Air Mattress won’t deflate, it could be the result of a blocked valve or a damaged pump. Check to make sure that the valves are open and that all connections between the mattress and the pump are securely fastened. If these do not fix the issue, then you may need to replace either the mattress or its pump with a new one.

How to Deflate an Intex Air Mattress Without a Pump

Inflating an Intex air mattress without a pump can be done easily by using your own breath. To start, locate the valve on the side of the mattress and unscrew it to open up the hole. Then, insert your mouth into the opening and blow gently until you feel resistance.

This will begin to push out all of the air inside, deflating your mattress. It may take some time to fully deflate but with patience and dedication, you’ll have an intex air mattress that is ready for storage!

How to Deflate Bestway Air Mattress

Deflating a Bestway air mattress is easy. First, locate the valve located at the top of your mattress and unscrew it clockwise to release the air. Once all of the air has been released, you can pack up your deflated mattress for storage until you are ready to use it again!

How to Deflate a Slumberjack Air Mattress

Inflating a Slumberjack air mattress can be relatively easy, but deflating it can be more complicated. To properly deflate your Slumberjack air mattress, you will need to open the deflation valve located near the top of the bed and begin pushing out as much air as possible. Once most of the air is gone, fold up the mattress until all remaining air is squeezed out of it before rolling or folding it up for storage.

How to Deflate Decathlon Air Mattress

If you need to deflate a Decathlon air mattress, the process is quite simple. All you need is an electric pump specifically designed for air mattresses or a vacuum cleaner with an appropriate attachment. To start, attach your chosen device to the valve on the mattress and turn it on.

Once all of the air has been removed from inside, remove the nozzle and let any remaining air escape before tightly folding up your mattress for easy storage!

How to Open Air Mattress Valve

Opening the valve of an air mattress is a relatively simple process. All you need to do is locate the valve and open it by pulling out or twisting the cap depending on the type of valve your mattress has. Some valves are located near one corner while others may be found along one side of the mattress.

Once you’ve opened the valve, adjust your desired firmness level by adding or releasing more air as needed until you reach your comfort level.


In conclusion, deflating an air mattress can be a simple and straightforward process if done correctly. By following the steps outlined in this blog post, you should have no problem efficiently packing away your air mattress with minimal effort. Be sure to always follow safety guidelines when performing any kind of maintenance on your air mattress to ensure it lasts as long as possible.

Leave a Comment

Share via
Copy link
Powered by Social Snap